Air Filters for Home: MERV Ratings and Furnace Fit (2026)
For most homes with a 1-inch filter slot, a MERV 13 filter is the upgrade the EPA points to, and the Filtrete MPR 1900 is the one to buy. If your furnace has a 4-inch media cabinet, buy the deep-pleat version of the same filter, which Filtrete sells as a 12-month filter. Either way, ask your HVAC technician whether the system can run MERV 13 before you switch.
Our Top Picks at a Glance
Compare the Picks
| Filter | MERV | Depth | Maker’s change interval | Fits | Score | Price | Link |
|---|---|---|---|---|---|---|---|
| Filtrete MPR 1900, 1-inch | 13 | 1 in (0.78 in actual) | At least every 90 days | Standard 1-inch slots | 3.9 | ~$36 (two 20x25x1) | Filtrete MPR 1900 on Amazon (~$36, two 20x25x1) |
| Filtrete MPR 1900, 4-inch | 13 | 4 in (4.31 in actual) | 12 months | Honeywell and AprilAire Space-Gard media cabinets | 4.8 | ~$73 (two 20x25x4) | Filtrete MPR 1900 4-inch on Amazon (~$73, two 20x25x4) |
| Filtrete MPR 1000, 1-inch | 11 | 1 in (0.81 in actual) | At least every 90 days | Standard 1-inch slots | 3.8 | ~$33 (two 20x25x1) | Filtrete MPR 1000 on Amazon (~$33, two 20x25x1) |
Prices are for a two-pack in the 20×25 size; every other size is priced differently, so check yours on the listing. Scores are the Clear Air Living filter technical score, built from published ratings and the maker’s listings. They are not hands-on test results.
What a MERV Rating Measures
MERV comes from ASHRAE Standard 52.2, which tests how much of each particle size a filter catches across three bands: 0.3 to 1.0 microns (E1), 1.0 to 3.0 microns (E2), and 3.0 to 10 microns (E3). The scale runs from 1 to 16. These are the minimums from the 2025 edition of the standard.
| MERV | 0.3 to 1.0 microns (E1) | 1.0 to 3.0 microns (E2) | 3.0 to 10 microns (E3) |
|---|---|---|---|
| 8 | No minimum | 20% or more | 70% or more |
| 11 | 20% or more | 65% or more | 85% or more |
| 12 | 35% or more | 80% or more | 90% or more |
| 13 | 50% or more | 85% or more | 90% or more |
| 14 | 75% or more | 90% or more | 95% or more |
A MERV 8 filter has no requirement at all below 1 micron, and a MERV 13 has to catch at least half of what passes through in that range. The EPA’s MERV explainer recommends at least MERV 13 for an upgrade, “or as high a rating as your system fan and filter slot can accommodate.”
Filtrete prints its own MPR scale on the box. Its chart pairs MPR 700 with MERV 8, MPR 1000 with MERV 11, MPR 1500 with MERV 12, MPR 1900 with MERV 13 and MPR 2500 with MERV 14.
Check the Fan and the Slot First
A denser filter can slow the air your fan moves. The EPA advises making sure the added resistance of a higher-rated filter will not impede airflow, and asking an HVAC technician which filter your system can run. Makers of the highest-rated filters often use deeper, more heavily pleated media to keep that resistance low, according to the agency’s technical summary of residential air cleaners.
Buy by the size printed on your old filter’s frame. That size is nominal, and the real one can run either way: Filtrete’s 20x25x1 MPR 1900 measures 19.62 by 24.62 by 0.78 inches, while its 20x25x4 is 4.31 inches deep. A filter too deep for the slot will not close in, and one too shallow leaves room for air to pass around it. Once it is in, look for gaps around the edges. Air that slips around a poorly fitted filter reduces how well it works, the summary notes, so the frame should sit flat with nothing bent, and the airflow arrow on the frame should point toward the furnace or air handler.
Fan Run Time
A furnace filter only works while the system fan runs. These filters “will not filter the air when the HVAC fan is not on,” the EPA summary says, and low run times can greatly limit their effect. Setting the thermostat fan to On rather than Auto keeps air moving through it, at the cost of running the fan longer.
For a single room that needs filtering around the clock, a portable purifier runs on its own schedule. Our air purifier guide for allergies sizes those by room.
The Three Filters in Detail
Filtrete MPR 1900, 1-inch
Best for: A furnace or air handler with a standard 1-inch slot that your technician has cleared for MERV 13.
Filtrete states, citing California Energy Commission data from January 2025, that the MPR 1900 has the best airflow of any brand’s 1-inch retail MERV 13 filter. Our score does not use that claim: it rates airflow headroom by depth, so this filter takes the 1-inch MERV 13 score of 3.
Amazon lists it in 18 one-inch sizes, from 12×12 to 24×24. At four changes a year, it costs the most per month of use of the three filters here.
Strengths
- MERV 13 without adding a media cabinet
- 18 one-inch sizes
Trade-offs
- Thin media resists airflow more than a deep filter
Filtrete MPR 1900, 4-inch
Best for: Homes that already have a 4-inch media cabinet beside the furnace.
This filter spreads the same MERV 13 rating over 4 inches of pleats, the approach the EPA summary describes for keeping resistance low at higher ratings. Filtrete sells it as a 12-month filter, so a two-pack covers two years, at about half the monthly cost of the 1-inch MPR 1900.
The listing says it is designed to fit Honeywell and AprilAire Space-Gard media air cleaners. A standard 1-inch slot will not take it, and adding a cabinet is a job for an HVAC contractor. Amazon lists it in seven sizes across 4-, 5- and 6-inch depths, some in a SlimFit version, so match the size and style printed on your old filter; the price and score here are for the 20x25x4.
Strengths
- MERV 13 with deep pleats for lower resistance
- One change a year
- Lowest cost per month on this page
Trade-offs
- Needs a 4-inch media cabinet
- Fewer sizes than the 1-inch filters
Filtrete MPR 1000, 1-inch
Best for: A 1-inch slot where a technician has advised against MERV 13.
MERV 11 is two ratings below MERV 13; Filtrete’s MPR 1500 sits between them at MERV 12. It still has a requirement in the finest band, which MERV 8 does not. Amazon lists it in 23 one-inch sizes.
As a way to save money it does little: in the 20×25 two-pack it costs a few dollars less than the MPR 1900, with the same change interval.
Strengths
- 23 one-inch sizes, the widest range here
Trade-offs
- Saves little over the MPR 1900
Electronic Air Cleaners: Ozone and Plate Cleaning
An electronic air cleaner mounted in the ductwork, also called an electrostatic precipitator, charges particles and collects them on metal plates. Its drawbacks, as the EPA’s technical summary lists them: efficiency falls as the plates load with particles, the plates need regular cleaning, and some units make a crackling sound as dust builds up. It also warns that duct-mounted precipitators and ionizers can generate ozone, in some cases enough to push indoor levels above public health standards.
Since October 2020, California has held electronic in-duct air cleaners to the same rule as portable ones: an electrical safety test and an ozone limit of 0.050 parts per million, according to the California Air Resources Board, which publishes a list of certified devices. If you already have an electronic cleaner, follow the maker’s cleaning schedule for the cell.
How We Score Filters
The filter technical score runs from 0 to 5 and uses only published ratings and the maker’s listings. Rated efficiency carries 40% of the weight: MERV 13 scores 5, MERV 11 scores 4 and MERV 8 scores 3. Airflow headroom carries 20%, with media 4 inches deep or more at 5, a 1-inch MERV 11 at 4 and a 1-inch MERV 13 at 3. Airflow headroom rates depth only, not makers’ airflow claims. The maker’s change interval carries 15% (12 months scores 5, 90 days 3), the number of sizes Amazon lists 10% (15 or more scores 5, 10 to 14 scores 4, fewer than 10 scores 3), and cost per month of use within this page 15%, using the table prices, scaled against the lowest and rounded to the nearest half point. Taking the 1-inch MPR 1900, the 4-inch MPR 1900 and the MPR 1000 in that order, they score 5, 5 and 4 on efficiency, 3, 5 and 4 on airflow, 3, 5 and 3 on interval, 5, 3 and 5 on sizes, and 2.5, 5 and 3 on cost.
Frequently Asked Questions
Is MERV 13 too high for a home furnace?
It depends on the fan and the slot. A 4-inch media cabinet handles MERV 13 with less resistance than a 1-inch slot; for a 1-inch slot, the technician check above is the answer.
Can I go above MERV 13?
Filtrete sells an MPR 2500 at MERV 14, which raises the 0.3 to 1 micron minimum from 50% to 75%. The same airflow check applies, and the step up in resistance is the reason a deep filter suits higher ratings better than a 1-inch one.
What is the difference between MPR and MERV?
MPR is Filtrete’s own scale and appears only on Filtrete boxes. MERV is the ASHRAE rating, so use it to compare brands.
Does a furnace filter replace an air purifier?
No. It cleans air only during fan run time, and a portable purifier keeps filtering one room when the system is idle.