Best Bathroom Exhaust Fans (2026)
For a bathroom up to 100 sq ft with room above the ceiling for a 7-3/8 inch housing, buy the Panasonic WhisperCeiling DC FV-0511VQ1. Other ceilings and bathrooms call for other fans, matched in the Which Fan for Which Bathroom table.
Our Top Picks at a Glance
Compare the Fans
| Model | Tier | Airflow | Sones (HVI rating, 0.1 in. w.g.) | Duct | Housing height and install | Extras | Price | Link |
|---|---|---|---|---|---|---|---|---|
| Panasonic FV-0511VQ1 | Mid-Range | 50 / 80 / 110 CFM | Under 0.3 | 4 or 6 in | 7-3/8 in; ceiling, distributors list 2×8 construction | None | ~$153 | FV-0511VQ1 on Amazon (~$153) |
| Panasonic FV-1115VQ1 | Premium | 110 / 130 / 150 CFM | Under 0.3 | 6 in | 7-3/8 in; ceiling, distributors list 2×8 construction | None | ~$208 | FV-1115VQ1 on Amazon (~$208) |
| Panasonic FV-0510VS1 | Budget | 50 / 80 / 100 CFM | Under 0.3 to 0.9 | 4 in oval (3 in round adapter sold separately) | 3-3/8 in; ceiling or wall | None | ~$91 | FV-0510VS1 on Amazon (~$91) |
| Broan Flex AE80K | Budget | 80 CFM | 0.7 | 4 in | 5-3/4 in; room side, Broan lists a 2×6 minimum | CleanCover grille | ~$89 | AE80K at Sylvane (~$89) |
| Broan Flex AE80SL | Mid-Range | 80 CFM | 0.7 to 0.8 (Broan lists both) | 4 in | 5-3/4 in; room side, Broan lists a 2×6 minimum | Humidity sensor, LED light | ~$128 | AE80SL at Sylvane (~$128) |
Which Fan for Which Bathroom
| Your bathroom | Pick | Why |
|---|---|---|
| Up to 100 sq ft, room for a 7-3/8 in housing, duct reachable | Panasonic FV-0511VQ1 | 50, 80 or 110 CFM chosen at install; 4 or 6 in duct |
| Over 100 sq ft with one tub or shower and a toilet | Panasonic FV-0511VQ1 | Two fixtures come to 100 CFM; use the 110 setting |
| Over 100 sq ft with a tub, a separate shower and an open toilet | Panasonic FV-1115VQ1 | Three fixtures at 50 CFM each come to 150 CFM |
| Shallow ceiling cavity or wall mount, up to two fixtures | Panasonic FV-0510VS1 | 3-3/8 in housing, rated for ceiling or wall |
| Ceiling you cannot reach from above, up to 75 sq ft (Broan’s rating) | Broan Flex AE80K | Housing and duct connector go in from below |
| Up to 75 sq ft, and the fan rarely gets switched on | Broan Flex AE80SL | Switches on when humidity passes the set point |
To work out how many CFM your room needs, see the exhaust fan size chart. In short: 1 CFM per square foot of floor up to 100 sq ft, never under 50 CFM, and fixtures counted above that, per the Home Ventilating Institute.
Check the Cavity Before You Choose
Measure the space above the ceiling opening and compare it with each housing height in the table, then read the installation sheet for how the housing sits against the ceiling; distributor listings give 2×8 construction for the WhisperCeiling fans, and Broan gives a 2×6 minimum for the Flex fans. Broan recommends its 80 CFM Flex fans for rooms up to 75 sq ft, a little under the 80 sq ft that HVI’s square-foot rule would give the same airflow. Neither Flex fan is recommended above 75 sq ft, so for a larger bath with no access from above, look for a fan whose installation manual covers room-side mounting at that size.
How We Score These Fans
Each fan gets a Clear Air Living technical score out of 5, a weighted mean of five criteria scored from published figures and rounded half up to one decimal. We do not test fans ourselves. Where a maker publishes no figure, the table says which source stands in. Installation fit is left out of the score on purpose: whether a fan fits your ceiling decides which fan you can use, not how well it ventilates, so the Which Fan for Which Bathroom table handles it instead.
| Criterion | Weight | How it is scored (0 to 5) |
|---|---|---|
| Delivered airflow | 30% | Share of rated CFM still delivered at 0.25 in. static pressure, lowest across settings: 100% or more 5, at least 90% 4, at least 80% 3, at least 70% 2, below 70% 1. With no figure for the model, ENERGY STAR’s figure for a same-series model at the same rated airflow; with none at all, 3. |
| Noise | 25% | HVI sone rating at 0.1 in. on the middle setting (the only setting on a single-speed fan): 0.3 or less 5, up to 0.5 4.5, up to 0.7 4, up to 1.0 3.5, up to 1.5 3, up to 2.0 2, above 2.0 1. Where a maker lists two figures, the higher one. |
| Energy efficiency | 20% | CFM per watt at 0.1 in. on the middle setting: 12 or more 5, at least 10 4.5, at least 8 4, at least 6 3, at least 4 2, below 4 1. |
| Controls | 15% | 1 for a switched single speed, plus 2 for selectable airflow, 1.5 for an automatic humidity or motion sensor, 0.5 for a built-in light. |
| Value | 10% | Price as a share of the most expensive fan in this guide: up to 45% scores 5, up to 65% 4, up to 80% 3.5, the rest 3. |
| Fan | Delivered airflow | Noise | Efficiency | Controls | Value | Score |
|---|---|---|---|---|---|---|
| Panasonic FV-0511VQ1 | 5 (53, 83, 111 CFM at 0.25 in.) | 5 (under 0.3) | 5 (13.6 CFM/W) | 3 | 3.5 | 4.6 |
| Panasonic FV-1115VQ1 | 5 (110, 131, 152 CFM) | 5 (under 0.3) | 5 (14.7 CFM/W) | 3 | 3 | 4.5 |
| Panasonic FV-0510VS1 | 5 (53, 81, 100 CFM) | 4.5 (under 0.4) | 4.5 (11.4 CFM/W) | 3 | 5 | 4.5 |
| Broan Flex AE80K | 2 (60 to 60.5 of 80 CFM, ENERGY STAR, same-series models) | 4 (0.7) | 1 (3.3 CFM/W) | 1 | 5 | 2.5 |
| Broan Flex AE80SL | 2 (same basis as the AE80K) | 3.5 (0.8) | 1 (3.0 CFM/W) | 3 | 4 | 2.5 |
The two Broans score lowest because at the same 80 CFM they draw about three and a half to four and a half times the power of the Panasonic fans, and the same-series ENERGY STAR data shows airflow falling by a quarter under the harder test. They stay in this guide because they are the only fans here whose maker documents installation entirely from the room side.
Our Picks in Detail
Panasonic WhisperCeiling DC FV-0511VQ1
Best for: Bathrooms up to 100 sq ft, and larger baths with two fixtures.
One fan covers a powder room on its 50 CFM setting and an 80 sq ft bath on 80. Its 110 setting covers a 100 sq ft bath, or a larger one with a single tub or shower and a toilet, which HVI’s fixture count puts at 100 CFM. Panasonic rates it under 0.3 sones at all three settings, and its DC motor draws 4.0 to 10.6 watts. The motor also raises its speed when it senses duct resistance, to hold the airflow you set.
At 0.25 inch of static pressure, a test closer to a real installed duct, Panasonic lists 0.4, 0.6 and 0.9 sones for the three settings. Its 0.6 sones at 80 CFM under that test compares with 0.7 for the AE80K under the easier 0.1 inch test; Broan publishes no 0.25 inch figure. The outlet takes a 4-inch or 6-inch duct, so a long run can step up to the larger size.
Strengths
- Switch-selectable airflow
- Takes a 4 or 6 in duct
Limitations
- 7-3/8 in housing
- No built-in light, sensor or timer
Panasonic WhisperCeiling DC FV-1115VQ1
Best for: Primary baths over 100 sq ft with a tub, a separate shower and an open toilet.
The 150 CFM top setting is what a three-fixture bath needs under HVI’s count, and no other fan here reaches it. Power draw runs from 6.8 to 11.8 watts across the 110, 130 and 150 settings.
If the toilet sits in its own enclosed room without a window, HVI calls for a separate fan there. The main fan then covers only the tub and shower, 100 CFM, which the FV-0511VQ1 handles on its 110 setting for less money. This fan takes a 6-inch duct and nothing smaller, so swapping it in for an old fan on a 4-inch duct means new ductwork.
Strengths
- Reaches 150 CFM
- 0.7 sones at 150 CFM and 0.25 in. static pressure
Limitations
- 6 in duct only, so a 4 in replacement needs new duct
- Needs the same 7-3/8 in clearance as the FV-0511VQ1
Panasonic WhisperValue DC FV-0510VS1
Best for: A ceiling with little depth above it, or a bathroom where the fan has to go in an exterior wall.
At 3-3/8 inches the housing is less than half the WhisperCeiling’s height, and Panasonic rates it for ceiling or wall mounting, including over a tub or shower on a GFCI circuit. A shallow bath with three fixtures needs 150 CFM, more than this fan delivers. It costs the least of the three fans here with selectable airflow, at 50, 80 or 100 CFM on a DC motor.
The trade is noise. Panasonic rates it under 0.3, under 0.4 and 0.9 sones on its three settings, and 0.5, 0.8 and 1.3 under the harder 0.25 inch test, against 0.4, 0.6 and 0.9 for the FV-0511VQ1. The outlet is a 4-inch oval; Panasonic sells a separate adapter for 3-inch round duct. Panasonic covers the DC motor for 6 years and other parts for 3.
Strengths
- Shallowest housing in this guide
- Ceiling or wall mounting
Limitations
- Up to 0.9 sones on its highest setting
- Tops out at 100 CFM, short of a three-fixture bath
Broan Flex AE80K
Best for: Replacing a fan in a bathroom of 75 sq ft or less that sits under another floor.
The Flex housing fits through the ceiling opening and its duct connector attaches from below, so the ceiling needs no opening beyond the fan’s own. Broan lists 2×6 as the minimum framing.
It runs at one fixed speed, 80 CFM at 0.7 sones on a 4-inch duct, and draws 24.5 watts. The WhisperCeiling FV-0511VQ1 draws 5.9 watts on its 80 CFM setting. The 80 CFM rating is taken at 0.1 inch of static pressure. On an old 4-inch flexible duct longer than a few feet, delivered airflow will fall short of it, so look at the duct through the old fan’s opening before you buy. Broan publishes no 0.25 inch figure for the AE80K; ENERGY STAR lists two other Broan Flex 80 CFM models, the AE80B and AE80LK, at 60 to 60.5 CFM under that test.
Strengths
- Installs without attic access
- CleanCover grille with few dust slots
Limitations
- Single fixed speed
- Broan rates it for rooms up to 75 sq ft
Broan Flex AE80SL
Best for: A bathroom up to 75 sq ft where the fan rarely gets switched on.
Broan’s Sensaire humidity sensor turns the fan on when humidity passes a set point you adjust. It adds a 3500K LED light in the grille, and it installs from the room side like the AE80K. Broan lists it as UL-listed for use over a tub or shower on a GFCI circuit.
The fan itself matches the AE80K: 80 CFM on a 4-inch duct at one speed. Broan’s spec table lists 0.7 sones, though its feature list on the same page says 0.8. The duct check under the AE80K applies here too.
Strengths
- Adjustable humidity set point
- Built-in 3500K LED
Limitations
- Single fixed speed
- Same short-duct caution as the AE80K
Frequently Asked Questions
What is the quietest bathroom exhaust fan here?
The two WhisperCeiling fans, rated under 0.3 sones at every setting. Panasonic also publishes a harder 0.25 inch test figure, 0.6 sones for the FV-0511VQ1 on its 80 CFM setting; Broan publishes none for comparison.
Is a humidity-sensing fan worth it?
HVI recommends running a bathroom fan for 20 minutes after a shower, so a sensor pays off where that does not happen. A humidity sensor like the AE80SL’s switches the fan on and keeps it running until humidity falls below its set point. If people already switch the fan on but turn it off too soon, a wall timer switch on any of these fans keeps it running for a set time instead. A timer switch is also the option for a bath over 75 sq ft, beyond the AE80SL’s rating.
Can I replace a bathroom fan without going into the attic?
Yes, for a bathroom up to 75 sq ft, with a room-side model such as the Broan Flex AE80K or AE80SL, whose housing and duct connector go in through the ceiling opening. For any other fan, check its installation manual for room-side instructions before buying it for a ceiling you cannot reach from above.
Should a bathroom fan have a light?
A built-in light replaces a separate fixture, which matters most over a tub or shower. The AE80SL is the only fan here with one, and Broan lists it as UL-listed for that location on a GFCI circuit. Panasonic sells light versions of the WhisperCeiling line, which are not reviewed here.